Items where Subject is "Engineering"

Article

Ahmed, Kawser and Bousson, Kouamana and Coelho, Milca de Freitas (2021) A Modified Dynamic Programming Approach for 4D Minimum Fuel and Emissions Trajectory Optimization. Aerospace, 8 (5). p. 135. ISSN 2226-4310

Aigbe, Uyiosa Osagie and Ukhurebor, Kingsley Eghonghon and Onyancha, Robert Birundu and Okundaye, Benedict and Pal, Kaushik and Osibote, Otolorin Adelaja and Esiekpe, Ese Lawrence and Kusuma, Heri Septya and Darmokoesoemo, Handoko and Kumar, Amit (2022) A Facile Review on the Sorption of Heavy Metals and Dyes Using Bionanocomposites. Adsorption Science & Technology, 2022. pp. 1-36. ISSN 0263-6174

Alam, Manjurul and Mut, Fernando and Cebral, Juan R. and Seshaiyer, Padmanabhan (2021) Quantification of the Rupture Potential of Patient-Specific Intracranial Aneurysms under Contact Constraints. Bioengineering, 8 (11). p. 149. ISSN 2306-5354

Aleemardani, Mina and Trikić, Michael Zivojin and Green, Nicola Helen and Claeyssens, Frederik (2021) The Importance of Mimicking Dermal-Epidermal Junction for Skin Tissue Engineering: A Review. Bioengineering, 8 (11). p. 148. ISSN 2306-5354

Alnashiri, Hassien M. and Modigunta, Jeevan Kumar Reddy (2022) A Brief Review on Heavy Metal Bioaccumulation Studies from Red Sea. Adsorption Science & Technology, 2022. pp. 1-8. ISSN 0263-6174

Alnmr, Ammar and Mayassah, Mais (2024) Innovations in Offshore Wind: Reviewing Current Status and Future Prospects with a Parametric Analysis of Helical Pile Performance for Anchoring Mooring Lines. Journal of Marine Science and Engineering, 12 (7). p. 1040. ISSN 2077-1312

Alor, K. P. and Ezekoye, B. A. and Ugwuoke, P. E. and Offiah, S. U. and Ezema, F. I. and Akor, S. and Okafor, I. F. and Ekechukwu, O. V. (2023) A Review of Advances on Natural Dye Sensitized Solar Cells (NDSSCs). Journal of Engineering Research and Reports, 25 (10). pp. 153-166. ISSN 2582-2926

Alsohaimi, Ibrahim Hotan and Hua, Ming (2022) Hybrid PSf/TNT-SO3H Ultrafiltration Membrane Fouling by Sodium Alginate: Effect of Permeation Flux on Fouling Resistance and Desalination Efficiency. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

Aragon-Aguilar, Alfonso and Arriola-Medellin, Alejandro (2022) Thermal Behavior Analysis of Geothermal Systems under the Influence of Rock-Formation Structures. Journal of Engineering Research and Reports, 23 (11). pp. 16-36. ISSN 2582-2926

Arif, Tariq Mohammad and Ji, Zhiming and Rahim, Md Adilur and Nunna, Bharath Babu (2021) Modeling Focused-Ultrasound Response for Non-Invasive Treatment Using Machine Learning. Bioengineering, 8 (6). p. 74. ISSN 2306-5354

Arun Negemiya, A. and Shankar, A. N. and Guruprasad, B. and Prakash, B. and Dineshkumar, S. and Batu, Areda and Rajakumar, S. and Luo, Zhiping (2021) Investigation on Processing Maps of Diffusion Bonding Process Parameters for Ti-6Al-4 V/AISI304 Dissimilar Joints. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Ayele, Ashagrie Liyew and Tizazu, Belachew Zegale and Wassie, Abrham Bayeh and Schwantes, Daniel (2022) Chemical Modification of Teff Straw Biomass for Adsorptive Removal of Cr (VI) from Aqueous Solution: Characterization, Optimization, Kinetics, and Thermodynamic Aspects. Adsorption Science & Technology, 2022. pp. 1-25. ISSN 0263-6174

Bagirzade, Kerim and Mehdiyeva, Almaz (2022) Refinery Emergency Shutdown System Based on High Safety Analysis. Journal of Engineering Research and Reports, 23 (7). pp. 37-41. ISSN 2582-2926

Berkia, Abdelhak and Rebai, Billel and Mansouri, Khelifa and Chitour, Mourad and Khadraoui, Faicel (2023) Using finite element modeling to predict stress concentration factors in tubular T, Y and K joints. Engineering Solid Mechanics, 12 (2). pp. 103-112. ISSN 22918744

Biney, Evans and Akortia, Vincent K. and Kankam, Charles K. and Junior, John K. Quarm and Adzakey, Peter (2022) Assessing Fresh Concrete Performance and Water Absorption Characteristics of Concrete with Partially Replaced Broken Tiles. Journal of Engineering Research and Reports, 23 (12). pp. 339-352. ISSN 2582-2926

Boitier, Vincent and Estibals, Bruno and Huet, Florian and Seguier, Lionel (2023) Battery-Free Power Supply for Wireless Sensor Combining Photovoltaic Cells and Supercapacitors. Energy and Power Engineering, 15 (03). pp. 151-179. ISSN 1949-243X

Brukarczyk, Bartłomiej and Nowak, Dariusz and Kot, Piotr and Rogalski, Tomasz and Rzucidło, Paweł (2021) Fixed Wing Aircraft Automatic Landing with the Use of a Dedicated Ground Sign System. Aerospace, 8 (6). p. 167. ISSN 2226-4310

Bufalá Pérez, María and O’Connor Esteban, Miriam and Zubizarreta-Macho, Álvaro and Riad Deglow, Elena and Hernández Montero, Sofía and Abella Sans, Francesc and Albaladejo Martínez, Alberto (2021) Novel Digital Technique to Analyze the Influence of the Operator Experience on the Accuracy of the Orthodontic Micro-Screws Placement. Applied Sciences, 11 (1). p. 400. ISSN 2076-3417

Candan, Can and Tiken, Mehmet and Berberoglu, Halil and Orhan, Elif and Yeniay, Aydin (2021) Experimental Study on Km-Range Long-Distance Measurement Using Silicon Photomultiplier Sensor with Low Peak Power Laser Pulse. Applied Sciences, 11 (1). p. 403. ISSN 2076-3417

Chang, Young-Cheol and Reddy, Motakatla and Imura, Kazuma and Onodera, Rui and Kamada, Natsumi and Sano, Yuki (2021) Two-Stage Polyhydroxyalkanoates (PHA) Production from Cheese Whey Using Acetobacter pasteurianus C1 and Bacillus sp. CYR1. Bioengineering, 8 (11). p. 157. ISSN 2306-5354

Chiba, Seiki and Waki, Mikio (2023) Recent Development of Dielectric Elastomer Transducers and Potential Applications. Energy and Power Engineering, 15 (02). pp. 105-126. ISSN 1949-243X

Chuka, Chinwuko Emmanuel and Daniel, Ezeliora Chukwuemeka and Chiedu, Ezeanyim Okechukwu (2022) Parametric Prediction and Optimization of Mild Steel Geometry Composition Using TIG Welding Methods. Journal of Engineering Research and Reports, 23 (12). pp. 10-23. ISSN 2582-2926

Daradka, Haytham M. and Saleem, Abdelrahman and Obaid, Wael Abdulghani (2021) Antifungal Effect of Different Plant Extracts against Phytopathogenic Fungi Alternaria alternata and Fusarium oxysporum Isolated from Tomato Plant. Journal of Pharmaceutical Research International, 33 (31A). pp. 188-197. ISSN 2456-9119

Duan, Kaiti and Dash, Biraja and Sasson, Daniel and Islam, Sara and Parker, Jackson and Hsia, Henry (2021) Human iPSC-Derived Vascular Smooth Muscle Cells in a Fibronectin Functionalized Collagen Hydrogel Augment Endothelial Cell Morphogenesis. Bioengineering, 8 (12). p. 223. ISSN 2306-5354

Ebner, Julian and Humer, Diana and Klausser, Robert and Rubus, Viktor and Pell, Reinhard and Spadiut, Oliver and Kopp, Julian (2021) At-Line Reversed Phase Liquid Chromatography for In-Process Monitoring of Inclusion Body Solubilization. Bioengineering, 8 (6). p. 78. ISSN 2306-5354

Ederer, Jakub and Ecorchard, Petra and Slušná, Michaela Šrámová and Tolasz, Jakub and Smržová, Darina and Lupínková, Simona and Janoš, Pavel and Kooh, Muhammad Raziq Rahimi (2022) A Study of Methylene Blue Dye Interaction and Adsorption by Monolayer Graphene Oxide. Adsorption Science & Technology, 2022. pp. 1-16. ISSN 0263-6174

Edward, Luo Ching-Ruey (2024) Integrating Natural and Social Sciences for Urban Resilience and Sustainability. Journal of Engineering Research and Reports, 26 (1). pp. 88-101. ISSN 2582-2926

Enukashvily, Natella I. and Dombrovskaya, Julia A. and Kotova, Anastasia V. and Semenova, Natalia and Karabak, Irina and Banashkov, Roman E. and Baram, Dmitry and Paderina, Tatiana and Bilyk, Stanislav S. and Grimm, Wolf-Dieter and Kovalenko, Anton N. and Ivolgin, Dmitry and Prikhodko, Egor M. and Silin, Alexey V. (2021) Fibrin Glue Implants Seeded with Dental Pulp and Periodontal Ligament Stem Cells for the Repair of Periodontal Bone Defects: A Preclinical Study. Bioengineering, 8 (6). p. 75. ISSN 2306-5354

Erunkulu, Ibukun Olubusola and Malumbela, Goitseone and Oladijo, Oluseyi Philip (2023) Influence of chemical composition of soda ash activated fly ash and copper slag geopolymer pastes on compressive strength. Engineering Solid Mechanics, 11 (4). pp. 437-446. ISSN 22918744

Eze, Peter U. and Asogwa, Clement O. (2021) Deep Machine Learning Model Trade-Offs for Malaria Elimination in Resource-Constrained Locations. Bioengineering, 8 (11). p. 150. ISSN 2306-5354

Fan, Bingxin and Li, Wenxuan and Yin, Zilu and Wang, Meiyan and Chen, Chen (2023) Comparative Study on Energy Consumption Structure of Ordinary Rural Households and Rural Tourism Households in Zhejiang Province, China. Energy and Power Engineering, 15 (01). pp. 52-72. ISSN 1949-243X

Fayyadh, Shaymaa Mohammed and Abed, Foud Nihad and Awsaj, Emaad Muhamme and Mohammed, Samar S. and Mohamad, Abdulsattar Abdullah Hamad and Abdulridha, M. Mahdi and Alshehri, Sameer and Tadele, Gashaw and Enbeyle, Wegayehu and Rehman, Rabia (2022) Preparation of Alumina Nanoparticles and Coating with Polyvinylpyrrolidone to Treat Cadmium Contamination of Water. Adsorption Science & Technology, 2022. pp. 1-6. ISSN 0263-6174

Francisco, Inês and Paula, Anabela Baptista and Oliveiros, Bárbara and Fernandes, Maria Helena and Carrilho, Eunice and Marto, Carlos Miguel and Vale, Francisco (2021) Regenerative Strategies in Cleft Palate: An Umbrella Review. Bioengineering, 8 (6). p. 76. ISSN 2306-5354

Gierens, Klaus (2021) Theory of Contrail Formation for Fuel Cells. Aerospace, 8 (6). p. 164. ISSN 2226-4310

Gornyakov, Valeriy and Sun, Yongle and Ding, Jialuo and Williams, Stewart (2021) Computationally Efficient Models of High Pressure Rolling for Wire Arc Additively Manufactured Components. Applied Sciences, 11 (1). p. 402. ISSN 2076-3417

Goswami, Rumi and Dey, Amit Kumar and Ponnusamy, Senthil Kumar (2022) Use of Anionic Surfactant-Modified Activated Carbon for Efficient Adsorptive Removal of Crystal Violet Dye. Adsorption Science & Technology, 2022. pp. 1-28. ISSN 0263-6174

Guerra Guimarães, Tarcísio and Menezes Cardoso, Karla and Tralhão, Pedro and Marto, Carlos Miguel and Alexandre, Nuno and Botelho, Maria Filomena and Laranjo, Mafalda (2021) Current Therapeutics and Future Perspectives to Ocular Melanocytic Neoplasms in Dogs and Cats. Bioengineering, 8 (12). p. 225. ISSN 2306-5354

Heilemann, Florian and Dadashi, Alireza and Wicke, Kai (2021) Eeloscope—Towards a Novel Endoscopic System Enabling Digital Aircraft Fuel Tank Maintenance. Aerospace, 8 (5). p. 136. ISSN 2226-4310

Hotha, Kishore Kumar (2024) Fast-to-Clinic, Fast-to-Market in Biotech Innovation: Optimizing Chemistry Manufacturing & Controls (CMC) Excellence for Clinical and Commercial Success. Advances in Chemical Engineering and Science, 14 (03). pp. 155-171. ISSN 2160-0392

Huang, Peng and Liu, Denghui (2022) Review on Microscopic Model of Continuous Pedestrian Flow. Journal of Engineering Research and Reports, 23 (11). pp. 1-5. ISSN 2582-2926

Hussain, Muhammad Sadiq and Rehman, Rabia and Imran, Muhammad and Dar, Amara and Akram, Mehwish and Al-Abbad, Eman A. and Salvestrini, Stefano (2022) Eco-Friendly Detoxification of Congo Red Dye from Water by Citric Acid Activated Bioadsorbents Consisting of Watermelon and Water Chestnuts Peels Collected from Indigenous Resources. Adsorption Science & Technology, 2022. pp. 1-20. ISSN 0263-6174

Junior, John K. Quarm and Kankam, Charles K. and Dzivenu, Christopher K. and Akortia, Vincent K. (2022) Strength Characteristics of Concrete Partially Replaced with Glass Powder and Palm Kernel Shells. Journal of Engineering Research and Reports, 23 (12). pp. 24-38. ISSN 2582-2926

Kagucia, Fredrick M. and George, Owino and Manene, Franklin M. (2022) Performance of an Anisotropic Magneto-Resistive Sensor Electrical Energy Meter. Journal of Engineering Research and Reports, 23 (12). pp. 302-320. ISSN 2582-2926

Karpuk, Stanislav and Elham, Ali (2021) Influence of Novel Airframe Technologies on the Feasibility of Fully-Electric Regional Aviation. Aerospace, 8 (6). p. 163. ISSN 2226-4310

Khanna, Manoj K. and Malik, Sarika and Kumar, Hemant and Suruchi, . (2023) Indian Solar Panel Initiatives in Reducing Carbon Dioxide Emissions. Energy and Power Engineering, 15 (04). pp. 191-203. ISSN 1949-243X

Kocadagistan, Beyhan and Oksuz, Kubra and Kooh, Muhammad Raziq Rahimi (2022) Pb (II) Recovery by Modified Tuffite: Adsorption, Desorption, and Kinetic Study. Adsorption Science & Technology, 2022. pp. 1-17. ISSN 0263-6174

Labiod, Kotbia and Hazourli, Sabir and Bendaia, Marwa and Tlili, Mohamed and AitBara, Adel and Graine, Radouane and Meradi, Hazem and Rather, Sami-Ullah (2022) Removal of Azo Dye Carmoisine by Adsorption Process on Diatomite. Adsorption Science & Technology, 2022. pp. 1-17. ISSN 0263-6174

Lamont, Hannah C. and Masood, Imran and Grover, Liam M. and El Haj, Alicia J. and Hill, Lisa J. (2021) Fundamental Biomaterial Considerations in the Development of a 3D Model Representative of Primary Open Angle Glaucoma. Bioengineering, 8 (11). p. 147. ISSN 2306-5354

Laurent, Alexis and Abdel-Sayed, Philippe and Scaletta, Corinne and Laurent, Philippe and Laurent, Elénie and Michetti, Murielle and de Buys Roessingh, Anthony and Raffoul, Wassim and Hirt-Burri, Nathalie and Applegate, Lee Ann (2021) Back to the Cradle of Cytotherapy: Integrating a Century of Clinical Research and Biotechnology-Based Manufacturing for Modern Tissue-Specific Cellular Treatments in Switzerland. Bioengineering, 8 (12). p. 221. ISSN 2306-5354

Li, Shaobo and Wang, Lei and Zhu, Chuanqi and Ren, Qihan and Song, Zhengyang (2021) Research on Mechanism and Control Technology of Rib Spalling in Soft Coal Seam of Deep Coal Mine. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Liu, Li and Liu, Zhaohui and Yang, Chengcheng and Hay, Rotana (2021) Pretreatment of Crumb Rubber with a Silane Coupling Agent to Improve Asphalt Rubber Performance. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Living, Ounyesiga and Nnamchi, Stephen Ndubuisi and Ukagwu, Kelechi John and Abdulkarim, Abubakar and Jagun, Zaid Oluwadurotimi (2023) Minimization of Electric Power Losses on 132 kV and 220 kV Uganda Electricity Transmission Lines. Energy and Power Engineering, 15 (02). pp. 127-150. ISSN 1949-243X

Mabungela, Ntandokazi and Shooto, Ntaote David and Mtunzi, Fanyana and Naidoo, Eliazer Bobby and Kyzas, George (2022) The Adsorption of Copper, Lead Metal Ions, and Methylene Blue Dye from Aqueous Solution by Pure and Treated Fennel Seeds. Adsorption Science & Technology, 2022. pp. 1-21. ISSN 0263-6174

Mahardika, Pillar Satya and Gunawan, Anak Agung Ngurah and Kasmawan, I. Gde Antha (2022) Design of Automatic Door Lock Based on ATMEGA328P Microcontroller with MLX90614ESF DCI and HC-SR04 Sensors. Journal of Engineering Research and Reports, 23 (10). pp. 48-56. ISSN 2582-2926

Mano, Sekar and Ajay Sriram, RadhaKrishnan and Vinayagamurthy, Ganesan and Pillai, Subramania Nadaraja and Pasha, Amjad Ali and Reddy, Dwarshala Siva Krishna and Rahman, Mustafa Mutiur (2021) Effect of a Circular Slot on Hybrid Airship Aerodynamic Characteristics. Aerospace, 8 (6). p. 166. ISSN 2226-4310

Mekala, Mallaiah and Neerudi, Bhoopal and Are, Padma Rao and Surakasi, Raviteja and Manikandan, G. and Kakara, Vighneswara Rao and Dhumal, Aditya Abhaykumar and Pasha, S.K. Khadheer (2022) Water Removal from an Ethanol-Water Mixture at Azeotropic Condition by Adsorption Technique. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

Meyer, Patrick and Lück, Sebastian and Spuhler, Tobias and Bode, Christoph and Hühne, Christian and Friedrichs, Jens and Sinapius, Michael (2021) Transient Dynamic System Behavior of Pressure Actuated Cellular Structures in a Morphing Wing. Aerospace, 8 (3). p. 89. ISSN 2226-4310

Mitxelena-Iribarren, Oihane and Lizarbe-Sancha, Sara and Campisi, Jay and Arana, Sergio and Mujika, Maite (2021) Different Microfluidic Environments for In Vitro Testing of Lipid Nanoparticles against Osteosarcoma. Bioengineering, 8 (6). p. 77. ISSN 2306-5354

Mohan Kumar, A. and Rajasekar, R. and Manoj Kumar, P. and Parameshwaran, R. and Karthick, Alagar and Muhibbullah, M. and Xu, Jinyang (2021) Comparative Analysis of Drilling Behaviour of Synthetic and Natural Fiber-Based Composites. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Morante, David and Sanjurjo Rivo, Manuel and Soler, Manuel (2021) A Survey on Low-Thrust Trajectory Optimization Approaches. Aerospace, 8 (3). p. 88. ISSN 2226-4310

Muhamad Sauki, Nur Sa’adah and Damanhuri, Nor Salwa and Othman, Nor Azlan and Chiew Meng, Belinda Chong and Chiew, Yeong Shiong and Mat Nor, Mohd Basri (2021) Assessing the Asynchrony Event Based on the Ventilation Mode for Mechanically Ventilated Patients in ICU. Bioengineering, 8 (12). p. 222. ISSN 2306-5354

Mustapha, Sikirat Damilola and Ibitoye, B. A. (2022) Understanding of Traffic Signs by Drivers on Urban Roads – A Case Study of Ilorin, Kwara State. Journal of Engineering Research and Reports, 23 (12). pp. 39-47. ISSN 2582-2926

Nas, Engin and Özbek, Onur and Bayraktar, Furgan and Kara, Fuat and De Jesus, Abílio (2021) Experimental and Statistical Investigation of Machinability of AISI D2 Steel Using Electroerosion Machining Method in Different Machining Parameters. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Natrayan, L. and Kumar, P. V. Arul and Baskara Sethupathy, S. and Sekar, S. and Patil, Pravin P. and Velmurugan, G. and Thanappan, Subash and R, Lakshmipathy (2022) Water Retention Behaviour and Fracture Toughness of Coir/Pineapple Leaf Fibre with Addition of Al2O3 Hybrid Composites under Ambient Conditions. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Natrayan, L. and Kumar, P. V. Arul and Kaliappan, S. and Sekar, S. and Patil, Pravin P. and Velmurugan, G. and Gurmesa, Murtesa Dabesa and Pasha, S.K. Khadheer (2022) Optimisation of Graphene Nanofiller Addition on the Mechanical and Adsorption Properties of Woven Banana/Polyester Hybrid Nanocomposites by Grey-Taguchi Method. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

Natrayan, L. and Veeman, Dhinakaran and Patil, Pravin P. and Swamy Nadh, V. and Balamurugan, P. and Chewaka, Muse Degefe and Lakshmipathy, R (2022) Surface State Treatment of Carbon Dots Using Sulphur Dioxide Isotherm. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Nwanneka, Mmuonwuba and Sochima, Muogbo Emmanuel and Samuel, Onuegbu Akachukwu and Kizito, Maduba (2023) Analysis of Physical, Chemical and Biological Characteristics of Borehole Water in Awka, Awka South LGA, Anambra State, Nigeria. Journal of Engineering Research and Reports, 25 (12). pp. 116-127. ISSN 2582-2926

Obeng, Peter Appiah and Awere, Eric and Obeng, Panin Asirifua and Oteng-Peprah, Michael and Barnie, Samuel (2022) Wind Speed Thresholds for Adjusting Conventional Design Criteria for the Ventilated Improved Pit Latrine without Compromising Odour Control. Journal of Engineering Research and Reports, 23 (12). pp. 353-362. ISSN 2582-2926

Omale, P. A. and Aremu, A. K. and Omobowale, M. O. (2023) Modeling of Physical and Compressive Test Properties of Tigernut Using Response Surface Approach. Journal of Engineering Research and Reports, 24 (2). pp. 1-14. ISSN 2582-2926

Patel, Himanshu V. and Dave, Harshit K. (2022) The effect of stacking sequence and fiber orientation on tensile and flexural strength of fiber reinforced composite fabricated by VARTM process. Engineering Solid Mechanics, 11 (1). pp. 47-62. ISSN 22918744

Pellicer-Valero, Oscar J. and Gonzalez-Perez, Victor and Ramón-Borja, Juan Luis Casanova and García, Isabel Martín and Benito, María Barrios and Gómez, Paula Pelechano and Rubio-Briones, José and Rupérez, María José and Martín-Guerrero, José D. (2021) Robust Resolution-Enhanced Prostate Segmentation in Magnetic Resonance and Ultrasound Images through Convolutional Neural Networks. Applied Sciences, 11 (2). p. 844. ISSN 2076-3417

Petela, Ryszard (2023) Application of Exergy for Research on Increasing the Usefulness of Solar Radiation by Dispersing It into Monochromatic Beams. Energy and Power Engineering, 15 (01). pp. 73-103. ISSN 1949-243X

Pisanu, Tonino and Muntoni, Giacomo and Schirru, Luca and Ortu, Pierluigi and Urru, Enrico and Montisci, Giorgio (2021) Recent Advances of the BIRALET System about Space Debris Detection. Aerospace, 8 (3). p. 86. ISSN 2226-4310

Punmiya, Rajiv and Choe, Sangho (2021) ToU Pricing-Based Dynamic Electricity Theft Detection in Smart Grid Using Gradient Boosting Classifier. Applied Sciences, 11 (1). p. 401. ISSN 2076-3417

Reynel-Ávila, Hilda Elizabeth and Aguayo-Villarreal, Ismael Alejandro and Diaz-Muñoz, Lizbeth Liliana and Moreno-Pérez, Jaime and Sánchez-Ruiz, Francisco Javier and Rojas-Mayorga, Cintia Karina and Mendoza-Castillo, Didilia Ileana and Bonilla-Petriciolet, Adrián and khan, Nadeem A (2022) A Review of the Modeling of Adsorption of Organic and Inorganic Pollutants from Water Using Artificial Neural Networks. Adsorption Science & Technology, 2022. pp. 1-51. ISSN 0263-6174

Rusnak, Cameron R. and Menzemer, Craig C. (2023) Fracture Mechanics and Its Application in the Fatigue Behavior of Reinforced Welded Hand-Holes in Aluminum Light Poles. Open Journal of Civil Engineering, 13 (04). pp. 677-694. ISSN 2164-3164

S., Adegoke A. and K., Okpeki U. and O., Olabisi P. and M., Olukoya B. (2023) Performance Evaluation of A Peer-to-peer Wireless Ad-hoc Network. Journal of Engineering Research and Reports, 25 (12). pp. 206-213. ISSN 2582-2926

Saleem, Fatima and Bhatti, Haq Nawaz and Khan, Amina and Farhat, Lamia Ben and Elqahtani, Zainab Mufarreh and Alwadai, Norah and Iqbal, Munawar and Rehman, Rabia (2022) Polypyrrole/Magnetic/Tea Waste Composites for PO43− Ions Removal: Adsorption-Desorption, Kinetics, and Thermodynamics Studies. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Sanchez Ramirez, Diego Omar and Cruz-Maya, Iriczalli and Vineis, Claudia and Guarino, Vincenzo and Tonetti, Cinzia and Varesano, Alessio (2021) Wool Keratin-Based Nanofibres—In Vitro Validation. Bioengineering, 8 (12). p. 224. ISSN 2306-5354

Sari, Ida Pertiwi and Gunawan, Anak Agung Ngurah and Wibawa, I. Made Satriya and Putra, I. Ketut and Yusuf, Mahmud (2022) Design and Manufacture of Radiosonde Based on Arduino Pro Mini Using BME280 Sensor. Journal of Engineering Research and Reports, 23 (12). pp. 1-9. ISSN 2582-2926

Sekine, Katsuhiro and Kato, Furuto and Kageyama, Kota and Itoh, Eri (2021) Data-Driven Simulation for Evaluating the Impact of Lower Arrival Aircraft Separation on Available Airspace and Runway Capacity at Tokyo International Airport. Aerospace, 8 (6). p. 165. ISSN 2226-4310

Shin, Yunchan and Ham, Jeonggyun and Cho, Honghyun (2021) Experimental Study of Thermal Comfort Based on Driver Physiological Signals in Cooling Mode under Summer Conditions. Applied Sciences, 11 (2). p. 845. ISSN 2076-3417

Stocco, Thiago Domingues and Rodrigues, Pedro José Gomes and de Almeida Filho, Mauricio Augusto and Lobo, Anderson Oliveira (2021) Nanohydroxyapatite Electrodeposition onto Electrospun Nanofibers: Technique Overview and Tissue Engineering Applications. Bioengineering, 8 (11). p. 151. ISSN 2306-5354

Surakasi, Raviteja and Sripathi, Srujana and Nadimpalli, Sarada Purnima and Afzal, Sibtain and Singh, Bharat and Tripathi, Manoj and Hafa, Rahel Alemu and R, Lakshmipathy (2022) Synthesis and Characterization of TiO2-Water Nanofluids. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Sznajderman, Lucas and Ramírez-Díaz, Gabriel and Di Bernardi, Carlos A. (2021) Influence of the Apron Parking Stand Management Policy on Aircraft and Ground Support Equipment (GSE) Gaseous Emissions at Airports. Aerospace, 8 (3). p. 87. ISSN 2226-4310

Tarricone, Fabio and Brunetti, Antonio and Buongiorno, Domenico and Altini, Nicola and Bevilacqua, Vitoantonio and Del Vecchio, Antonio and Petrillo, Flavia (2021) Intelligent Neonatal Sepsis Early Diagnosis System for Very Low Birth Weight Infants. Applied Sciences, 11 (1). p. 404. ISSN 2076-3417

Tsoukas, Dimitrios and Muntean, Ilie and Simos, Christos and Sabido-Vera, Ruben (2023) Prospective Observational Study of a Non-Arthroscopic Autologous Cartilage Micrografting Technology for Knee Osteoarthritis. Bioengineering, 10 (11). p. 1294. ISSN 2306-5354

Verma, Preety and Godwin Ponsam, J. and Shrivastava, Rajeev and Kushwaha, Ajay and Sao, Neelabh and Chockalingam, AL and Bojaraj, Leena and JaikumarR, . and Chandragandhi, S. and Alene, Assefa and R, Lakshmipathy (2022) Predicting Carbon Residual in Biomass Wastes Using Soft Computing Techniques. Adsorption Science & Technology, 2022. pp. 1-8. ISSN 0263-6174

Wang, Huan and Di, Yingwei and Feng, Yunfei (2023) Prediction of Sedimentary Microfacies Distribution by Coupling Stochastic Modeling Method in Oil and Gas Energy Resource Exploitation. Energy and Power Engineering, 15 (03). pp. 180-189. ISSN 1949-243X

Wang, Jinlin and Li, Hai and Lin, Zhangjin and Huo, Hong (2021) Time-Fixed Glideslope Guidance for Approaching the Proximity of an Asteroid. Aerospace, 8 (5). p. 137. ISSN 2226-4310

Yang, Nihong and Chen, Lei and Yuan, Yuyu (2021) An Improved Collaborative Filtering Recommendation Algorithm Based on Retroactive Inhibition Theory. Applied Sciences, 11 (2). p. 843. ISSN 2076-3417

Yoon, Sugjoon and Shin, Dongcho and Choi, Younghoon and Park, Kyungtae (2021) Development of a Flexible and Expandable UTM Simulator Based on Open Sources and Platforms. Aerospace, 8 (5). p. 133. ISSN 2226-4310

Zhang, Zhijuan and Li, Pengwei and Zhao, Ting and Xia, Yuanhan and Sanz P rez, Eloy S. (2022) Enhanced CO2 Adsorption and Selectivity of CO2/N2 on Amine@ZIF-8 Materials. Adsorption Science & Technology, 2022. pp. 1-12. ISSN 0263-6174

Zheng, Zhaoyu and Lu, Jiyun and Liang, Dakai (2021) Load-Identification Method for Flexible Multiple Corrugated Skin Using Spectra Features of FBGs. Aerospace, 8 (5). p. 134. ISSN 2226-4310

Zhong, Zuliang and Zou, Hong and Hu, Xiangxiang and Liu, Xinrong and Giorgio, Ivan (2021) Experimental Study on Stiffness Softening of Soil-Rock Mixture Backfill under Metro Train Cyclic Load. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Çınar, Hasan and Kandemir, Ilyas (2021) Active Energy Management Based on Meta-Heuristic Algorithms of Fuel Cell/Battery/Supercapacitor Energy Storage System for Aircraft. Aerospace, 8 (3). p. 85. ISSN 2226-4310

Book Section

Apostu, Izabela Maria and Faur, Florin and Lazar, Maria (2020) Geotechnical Hazards and Their Potential Effects in Case of Flooding Former Open-pits. In: Emerging Trends in Engineering Research and Technology Vol. 11. B P International, pp. 145-165. ISBN 978-93-90431-76-2

Chrysanidis, Theodoros and Tegos, Ioannis (2020) Can the Diameter of Longitudinal Bars of Extreme Edges of R/C Walls Halt Transverse Buckling? In: Emerging Trends in Engineering Research and Technology Vol. 3. B P International, pp. 65-72. ISBN 978-93-90149-00-1

Deepalakshmi, R. and Vijayalakshmi, R. and Sasikala, S. (2020) A New Algorithm for Enlarging Text for Individuals Suffering from Low Vision. In: Emerging Trends in Engineering Research and Technology Vol. 3. B P International, pp. 80-91. ISBN 978-93-90149-00-1

Faur, Florin and Maria Apostu, Izabela and Lazăr, Maria (2020) Flooding Speed of Former Lignite Open Pits Regarded as a Determining Factor on the Stability of Final Slopes. In: Emerging Trends in Engineering Research and Technology Vol. 11. B P International, pp. 166-176. ISBN 978-93-90431-76-2

Hamidi, Nurkholis and Purnami, . and Wijayanti, Widya and Fahmi, Rizal (2024) Ignition and Combustion Characteristics of a Single Droplet of Blended Fuels of Kemiri Sunan [Reutealis trisperma (Blanco) Airy Shaw] Biodiesel. In: Current Approaches in Engineering Research and Technology Vol. 1. B P International, pp. 79-92. ISBN 978-81-972413-0-7

Huang, Xiaolong (2024) Design and Analysis of Miniaturized SIW Filter Loaded with Improved CSRR Structures. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 79-98. ISBN 978-81-971580-4-9

Krishnammal, V. P. and Vijayakumari, V. (2024) Survey on Timing Error Detection and Correction Methods for Fir Filter Applications. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 68-78. ISBN 978-81-971580-4-9

Kulkarni, R. N. and Srinivasa, C. K. (2020) Ameliorated Methodology to Represent UML Use Case Diagram into Table Format: Recent Study. In: Emerging Trends in Engineering Research and Technology Vol. 3. B P International, pp. 73-79. ISBN 978-93-90149-00-1

Kumar, R. Sanjay and Vijayan, D. S. and Nivetha, C. and Parthiban, D. (2020) Research on Utilization of Waste Materials in Soil Stabilization. In: Emerging Trends in Engineering Research and Technology Vol. 3. B P International, pp. 99-110. ISBN 978-93-90149-00-1

Monisha, M. and Rajendran, V. (2020) Spectral Efficiency Improvement for Home Area Network Applications Using Cognitive Radio Algorithm. In: Emerging Trends in Engineering Research and Technology Vol. 3. B P International, pp. 92-98. ISBN 978-93-90149-00-1

Monteiro, J. P. R. and Campilho, R. D. S. G. (2023) Evaluation of a Novel Structural Adhesive for the Automotive Industry. In: Techniques and Innovation in Engineering Research and Technology Vol. 5. B P International, pp. 1-12. ISBN 978-81-960791-9-2

Nahas, Mahmoud Nadim (2023) The Fracture Behavior of Random Fiber-Reinforced Composite Specimens: Experimental Investigation. In: Techniques and Innovation in Engineering Research and Technology Vol. 5. B P International, pp. 37-48. ISBN 978-81-960791-9-2

Ozueigbo, Okechukwu and Agunwamba, J. C. (2023) Two New Equations for Energy Dissipation down a Stepped Spillway with Channel Slopes between 3.4° and 26.6°. In: Techniques and Innovation in Engineering Research Vol. 8. B P International, pp. 14-32. ISBN 978-81-19039-43-2

Prabha, Helen and Saranya, . and Manisha, . and Sowmya, . (2024) Forest Fire Occurrence Prediction Using Machine Learning. In: Current Approaches in Engineering Research and Technology Vol. 1. B P International, pp. 70-78. ISBN 978-81-972413-0-7

Raghavendra, B. V. and Pai, Dayananda K. (2023) Influence of Crossover Probability on Performance of Genetic Algorithm in Scheduling of Parallel Machines. In: Techniques and Innovation in Engineering Research and Technology Vol. 5. B P International, pp. 27-36. ISBN 978-81-960791-9-2

Reddy, Algubelly Yashwanth and Singh, Taresh and Poornima, Galiveeti and Nithya, R. and Ramanan, S. V. (2023) Machine Learning for Industrial Internet of Things. In: Techniques and Innovation in Engineering Research Vol. 8. B P International (a part of SCIENCEDOMAIN International), pp. 1-13. ISBN 978-81-19039-43-2

Reddy, P. Srinivas and Krishna, M. V. S. Murali and Sanke, Narsimhulu (2023) Ivestigations on Exhaust Emissions of Insulated Diesel Engine Fuelled with Fish Oil Blended with Copper Nano Particles. In: Techniques and Innovation in Engineering Research Vol. 8. B P International, pp. 48-62. ISBN 978-81-19039-43-2

Sangeetha, S. P. and Raj, P. S. Aravind and Divahar, R. (2020) Monitoring the Performance of Exclusive Bus Lanes in Chennai. In: Emerging Trends in Engineering Research and Technology Vol. 11. B P International, pp. 177-182. ISBN 978-93-90431-76-2

Sathiyanarayanan, T. and Kumar, K. Nivesh and Kumar, R. Ashok (2023) Parallel Operation of Voltage Source Converter Based Distributed Generators in Grid Forming Mode. In: Techniques and Innovation in Engineering Research Vol. 8. B P International, pp. 33-47. ISBN 978-81-19039-43-2

Seetharamaiah, R. and Ravindran, A. S. and Gopinath, S. M. and Manjunatha, B. and Swamy, A. Sathyanarayana (2024) Effect of High Inlet Air Pressure on the Performance and Emission of a Diesel Engine: A Regression Analysis with Biofuel Evaluation. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 99-108. ISBN 978-81-971580-4-9

Viana, F. A. L. and Campilho, R. D. S. G. and Rocha, R. J. B. (2023) Bonded Joint Strength Prediction by the Inverse Method. In: Techniques and Innovation in Engineering Research and Technology Vol. 5. B P International, pp. 13-26. ISBN 978-81-960791-9-2